ECONTECH

Enecio Construction Technology Inc. is a manufacturing company that produces construction chemicals for the construction industry.

The company has carefully tailored the products to adapt to the local climate condition and to the local market need.

ECONTECH CONSTRUCTION CHEMICALS PRODUCT LINES

1. MOULD RELEASE AGENTS:

Eco Form Care - Oil based shutter release agents; Shutters oils for all types of formwork and high quality concrete finish.
Eco MRA EB – Emulsion- based mould release agents; for all types for formworks.
Eco Split BBWX – Water-repellant wax based bond breaker; For “match-cast” , “tilt-up” and “tilt-slab” constructions

2. CONCRETE ADMIXTURES:

Ecoment PB 100 – Water reducing concrete admixture; Used in mass and structural concrete where longer setting times are required, with some water reduction.
Ecofast Rapid – Hardening accelerator for concrete and mortar in combination with super plasticizer admixture; combined with a super plasticizer, for very high-early strength concrete in road repairs and per-cast factory.
Ecoplast R – Water- reducing and set retarding admixture; As plasticizer and retarder for ready mix concrete with lasting control of slump loss.
Ecocrete XP – High range water reducing and set accelerating concrete admixture; As super plasticizer and hardening accelerator for concrete in pre-cast factories

See next page for more concrete admixtures other products

3. MORTAR ADMIXTURES:

EcoPlast ZEG – Admixture for expanding cement group; For grouting post-tensioned cable ducts, rock and soil anchoring.
Eco Latex – Water resistant bonding agents for mortar and integral mortar improver.

4. CEMENTITIOUS MORTARS:

Eco Grout FS &Eco Grout HS – Non-shrink self-leveling cementitious grouts; for grouting columns in pre-cast construction, concrete anchors, cavities, bearing, etc.
Ecofill CTA B, Ecofill CTA, Ecofill Mortar, Ecofill Fine, Ecofill Filler – Cementitious plaster / different applications for interior and exterior surfaces; Fast and economical way to level uneven substrates to give a smooth finishes.
Eco REP7, Fixing Mortar – All purpose quick setting waterproofing mortar; Rapid faixing and installtion of steel frames; rags bolts, light load anchors etc.
Ecokrete – Prepacked High strength Concrete; Building or repairing columns, beams, floors, walkways, concrete roads, etc.

5. CURING COMPOUND / SURFACE RETARDER

Ecocure S – Silicate based, clear, non toxic and curing compound; For applications where surface finishes are required.
Ecosure WS – Wax based, clear, none staining and non toxic curing compound; For applications where surface finishes are resuired.
Ecocure E – Emulsified paraffin based curing compound; on runways and roads, where curing efficiency is required.
Eco Expo Top SR – Surface Retarder for exposed aggregate finish; to expose aggregates for architectural keying process.

6. WATERPROOFING SYSTEMS

Aquatite – Integral waterproofing admixture for cement sand mortar; Suitable for the waterproofing of concrete structures.
Eco Top Seal – Flexible protective and waterproofing slurry; for external and internal waterproofing repair work and protection from frost and deleterious effects of environments.
Eco REP7 – Quick setting waterproofing compound; to seal minor infiltrations and leakages.
Eco Water Stop – Integral waterproofing admixture cement sand mortars; to be mixed with water and for use as gauging liquid for mortar
Eco Water Plug – Extra Quick setting waterproofing compound ; to seal severe water infiltration in concrete.

7. FLOOR TREATMENT AND TOPPINGS:

Eco floor Hard (available in green , grey, brown, natural and red colors – Non-metallic floor hardener on mineral base; Superficial reinforcing of floors and screeds where good abrasion resistance is required.
Eco Floor DPH – Concrete floor dust-proofer and hardener; Eco floor DPH can be used on both new and old concrete floors.
Ecofloor Mortar – Self-leveling sub-floor screed ; For repair o as underlayment prior to other floor finishes

8. TILE ADHESIVE AND TILE GROUTS:

Ecofix Natural, Ecofix Heavy Duty – Prepacked cementitious tile adhesive: Used where the best adhesion of different types of tiles to different substrates is required
Eco Tile Grout – Blend of cement, fillers, pigments and synthetic additives for tile joints filling.

9. EPOXY PRODUCTS: